The Document Library
Search everything published — by keyword, or by narrowing the filters.
- DocumentationSep 10, 2026
Controller Quick Start
First power-up, network configuration and the default alarm thresholds.
- DocumentationSep 10, 2026
Installation and Commissioning Manual
Mechanical installation, alignment tolerances, electrical termination and the commissioning checklist.
- Tip SheetsSep 10, 2026
Wet Well Maintenance Checklist
Ten checks that prevent most emergency callouts.
- ReportsSep 10, 2026
Sustainability Report 2025
Verified performance against our published commitments.
- WebinarsSep 10, 2026
Cutting Aeration Energy: Live Q&A
A recorded session on ammonium-based control, with audience questions.
- VideosSep 10, 2026
SX-200 Installation Walkthrough
Rail system fitting, cable routing and first-start checks.
- FAQsSupport & FAQSep 10, 2026
How often should submersible pumps be serviced?
Service intervals depend on duty and medium, not calendar time alone.
- Case StudiesCase StudiesSep 10, 2026
Riyadh Lift Station Modernisation
Replacing 14 ageing lift-station pumps cut blockage callouts by 71% and energy use by 19%.
- White PapersWhite PapersSep 10, 2026Members
Membrane Fouling in High-Salinity Feedwater
A field study of pretreatment strategies for Red Sea and Arabian Gulf intakes, with cleaning-interval data from eleven plants.
- BlogSep 7, 2026
Non-revenue water, with the arithmetic shown
Splitting real losses from apparent ones, and what each is actually worth fixing.
- BlogAug 17, 2026
Holding a chlorine residual at the far end of the network
Booster placement, tank turnover and the trade-off between disinfection and taste complaints.
- BlogAug 8, 2026
Pumping energy per cubic metre, month by month
The one number worth putting on a wall, and the three ways it gets reported wrongly.